Sound Bases

Tech support for solutions for soundbases.

570, 670, 770 Master Reset
Master Reset the 570, 670, 770   1. Turn the speaker off using the power button on the ZVOX remote or hold the mute button on the front of the speaker u...
Mon, Mar 23, 2020 at 2:46 PM
Connected via Optical and still no audio?
If you own a 220, 320, 420, 555, 580 model ZVOX and you are connected via Optical to the TV and have NO audio, you must make sure you are set to the right i...
Tue, Aug 27, 2019 at 3:06 PM
Disable Auto Standby 220, 320, 420, 555, 580
     Flick the power switch on the rear of the speaker to OFF.      With your other hand, PRESS & HOLD the MUTE button on the front of the speaker (N...
Sun, Nov 8, 2020 at 2:13 PM
Disable Auto Standby 350, 450, 570, 670, 770
Disabling Auto Standby (Randomly shutting OFF while watching TV?)  We’ve made the Auto Standby feature as sensitive as we possibly could. The problem is i...
Mon, Oct 5, 2020 at 4:19 PM
Fluttering sound on 220/320420/555/580
If you have a modem or router extremely close will cause a fluttering feedback noise, you want to move that router further away or you may have an issue wit...
Tue, Aug 27, 2019 at 3:07 PM
LED Replacement on Sound Bases
Replacing the LED panel where the numbers appear should solve your problem of the unit not powering on.   That LED panel is where the software is loaded a...
Mon, Apr 12, 2021 at 1:14 PM
Master Reset 220, 320, 420, 555, 580
Master Reset 220, 320, 420, 555, 580  Press and hold Mute and Volume Up buttons on the front panel for 5 seconds until PS-0 Flashes on the display then ...
Tue, Aug 27, 2019 at 3:09 PM
SoundBase Grill Removal
Start on one corner of the grille with the pick tool and very slowly pull the grille out.  Once one corner is pulled out 1/8" - 1/4" remove the pi...
Thu, Sep 3, 2020 at 9:55 AM
Soundbase Learning Instructions
Click here for video instructions 
Tue, Aug 27, 2019 at 3:10 PM
SoundBase PS Settings Menu
PS Emulation Modes The first six options in the PS menu are emulation modes. See “Using the SoundBase remote control emulation modes” for instructions. PS...
Tue, Aug 27, 2019 at 3:08 PM