1.  Before using the remote you must set the PS number to match the code you will eventually enter in for a Sony Device.  On the Physical ZVOX press and hold the Power/Mute button and the Volume Up button at the same time for 3 seconds until the letters PS-0 flash on the display, once you see that quickly tap on the same volume Up button once so the display will now read PS-1 if it does release and it will go away after a few seconds.  On the attachment there will be written instructions on how to set the PS number to PS-1 for Sony.


 2.  Press the Google Home button on your remote to access the Android TV Home Screen


.

3.  From the Android TV Home Screen, scroll down until you reach Settings.
 


4.  Select Settings


If unsuccessful, try a different code for Sony